Typical soils
Oils/greases, waxes, inks, silicone contamination (case-dependent), resins, adhesive residues.
Product Industrial Cleaning
Solvent-Based Degreaser
Solvent system engineered for rapid removal of oils, greases, waxes, inks, and adhesive residues where aqueous cleaning is insufficient. Available in fast-evaporating, controlled-evaporation, and low-residue profiles depending on your process.
✓ Strong solvency for difficult residues
✓ Fast evaporation options
✓ Low-residue profiles available
✓ Wipe • spray • soak
✓ Spec per inquiry
Packaging: drums / IBC / bulk (as applicable)
Documentation: SDS / COA / TDS on request
Lead time depends on lane, spec & volume
If your application is a “pre-paint / pre-bond” critical cleaning step, tell us your substrate and downstream process (coating, adhesive, sealing). We can align a low-residue, controlled evaporation profile and suggest verification tests.
Applications
Solvent degreasing is typically chosen when residues are hydrophobic, tenacious, or time-critical. Share your soil type and process constraints and we’ll align the correct solvent class and evaporation profile.
- Adhesive, resin, wax, and tackifier residue removal
- Heavy oil/grease removal from metal parts and assemblies
- Pre-paint and pre-bond cleaning steps (low residue requirement)
- Ink, marker, and processing residue removal (select solvent class to match chemistry)
- Final wipe-down prior to packaging where rapid dry time matters
Typical substrates
Steel, stainless, many coated metals; plastics vary widely—always spot test for swelling/crazing.
Where it fits
When aqueous cleaning cannot achieve required residue level, speed, or compatibility with your process.
Some residues (e.g., certain cured polymers or cross-linked adhesives) may require mechanical action, heat, or a staged process. Tell us what you’re removing and how quickly it must be done.
Performance profile
Solvent cleaning performance is driven by solvency balance, evaporation rate, residue behavior, and material compatibility. We can propose options depending on whether your priority is cleaning power, dry time, odor control, or safety constraints.
Strong solvency
Designed to dissolve and lift hydrophobic soils (oils, greases, waxes) and many adhesive residues.
Fast processing
Fast-evap options support quick wipe-downs and reduced downtime between steps.
Residue control
Low-residue profiles help reduce risk of paint/adhesive defects when used correctly.
Process flexibility
Supports wipe, spray, immersion and parts cleaning; options for slower evaporation when dwell is needed.
When solvent is the right tool
- Aqueous wash cannot remove resin/adhesive residues effectively
- Very short cycle time requires rapid drying
- Water contact is undesirable (moisture-sensitive parts)
Key trade-offs to manage
- Flammability and VOC considerations (site rules vary)
- Material compatibility (plastics/rubbers/coatings)
- Worker exposure controls: ventilation and PPE
What we can tailor
- Evaporation rate: fast, standard, controlled
- Residue profile: low residue / no film (by spec)
- Odor and handling constraints (where feasible)
If you have a current solvent cleaner, share its SDS or key properties (odor, dry time, residue, flash point). We can align a comparable profile or propose an upgrade based on your constraints.
How we select the right solvent profile
“Solvent-based degreaser” is a family, not a single product. Selection depends on residue chemistry, substrate sensitivity, and the required evaporation behavior. Below is a practical framework for specifying what you need.
Evaporation rate
Fast for quick wipe-downs; controlled for better dwell time and heavy soils; standard for general use.
Residue requirement
Pre-paint/pre-bond needs very low residue; maintenance cleaning can tolerate minor residue (case-specific).
Material sensitivity
Plastics/rubbers/coatings may swell or craze—spot test and select a compatible solvent class.
Common selection questions
- Do you need a fast-dry wipe or a dwell/soak cleaner?
- Is the goal visual cleanliness or bond/paint readiness?
- Are there flammable storage or VOC restrictions on-site?
- Are there plastics/rubbers that must remain unaffected?
Provide your “must-haves” (dry time, residue, restrictions) and “must-not” (materials to avoid damaging). We’ll propose a specification aligned to your process and procurement lane.
Typical specifications & formats
Values depend on formulation and customer requirements. Confirm final values on quotation (SDS/TDS/COA as applicable).
Type
Solvent degreaser (ready-to-use blend; formulation per requirement)
Evaporation rate
Fast / standard / controlled options
Residue profile
Low residue / minimal film options available
Application
Wipe, spray, immersion, parts cleaning (by spec)
Packaging
Drums (typical), IBC or bulk where applicable
Documentation
SDS / TDS / COA on request (availability depends on lane)
Indicative technical data (example ranges)
Typical ranges shown for guidance only. Exact values depend on selected solvent class and performance goals. Always rely on the supplied SDS/TDS for your delivered grade.
| Property | Typical range / description | Why it matters |
|---|---|---|
| Appearance | Clear liquid (typical) | Visual clarity helps detect contamination and supports controlled application. |
| Odor | Varies by solvent class | Relevant for indoor use and worker comfort; specify any odor constraints. |
| Evaporation rate | Fast / standard / controlled | Drives cycle time, dwell time, and wipe behavior. |
| Residue after evaporation | Low to minimal (by spec) | Critical for pre-paint/pre-bond cleaning and avoiding surface film. |
| Flash point | Formulation-dependent | Drives EHS handling, storage classification, and site acceptance. |
| Material compatibility | Substrate-dependent | Plastics, rubbers, and coatings can be sensitive—spot test recommended. |
| Water miscibility | Not miscible / partially miscible / miscible (by spec) | Affects rinsing strategy and wastewater handling if a water rinse is used. |
Specifications may vary depending on batch, origin, and packaging selection. For critical processes, request a sample and validate in a pilot.
Use guidance
Solvent degreasers are commonly used neat (ready-to-use). Best results come from controlling application volume, dwell time, and wipe technique to avoid re-deposition.
Wipe cleaning
Apply to a clean lint-free wipe, clean in one direction, and replace wipes frequently to avoid re-soiling.
Spray cleaning
Use controlled spray; allow dwell (seconds to minutes) then wipe or drain. Manage overspray and ventilation.
Immersion/soak
Use where dwell time is needed; confirm material compatibility and plan for solvent recovery/maintenance.
Process tips
- For pre-bond/pre-paint: use clean, low-lint wipes and avoid touching cleaned surfaces.
- If residue is observed: reduce application volume and verify “low residue” spec selection.
- For heavy grease: consider a two-step clean (bulk removal + final solvent wipe).
- Validate cleanliness using your preferred checks (water-break, dyne pens, tape test, or internal method).
If you have a defined acceptance test (water-break free surface, dyne level, bonding KPI), include it in your inquiry. This helps us propose the correct residue profile and process recommendation.
Safety, handling & storage
Solvent products may be flammable and can require ventilation and exposure controls. Always follow the supplied SDS and your internal EHS requirements.
PPE (typical)
Chemical-resistant gloves, eye protection; respiratory protection and protective clothing as required by your risk assessment.
Ventilation
Use with adequate ventilation. Controls depend on solvent class, application rate, and workspace volume.
Storage
Store in sealed containers away from heat/ignition sources and incompatible chemicals. Observe local regulations.
Disposal and contaminated wipes: plan for collection and disposal per local regulations and your SDS guidance. For high-use sites, consider recovery/segregation practices to reduce waste volume.
Supply & procurement details
Built for repeat buying: clear inquiry inputs, documentation readiness, and packaging options per lane.
Packaging options
Common: 200 L drums, 1000 L IBC (where applicable), bulk options depending on destination and lane.
Documentation set
SDS and TDS on request. COA availability depends on grade and supply lane.
Lead time
Depends on formulation, packaging, labeling, and order size. Confirmed on quotation.
Compliance constraints
Share any restricted substances list, VOC limits, or facility rules—these can define the viable solvent class.
Sampling & pilots
Pilot quantities may be possible for qualified technical inquiries; sampling depends on lane and destination.
Commercial terms
Quotes can be structured by destination and Incoterms. Provide preferred terms for faster pricing.
Solvent products can have transport and storage classifications that influence freight options. If you have carrier restrictions, mention them early so we quote the correct logistics pathway.
FAQ
Common technical and procurement questions for solvent degreasers.
Will it damage plastics?
Some solvents can swell, craze, or stress-crack plastics and elastomers. Provide your material list and we’ll propose a compatible profile. Always validate with a spot test and short exposure trial.
Can it be used as a final pre-paint wipe?
Yes, when a low-residue profile is selected and the wipe process is controlled. For critical coating/bonding steps, specify your substrate and quality check method.
Fast evaporating or controlled evaporating?
Fast evaporation supports cycle time; controlled evaporation increases dwell time for heavy soils. Choose based on your process speed and soil severity.
Do you provide SDS/TDS/COA?
Yes—documentation depends on grade and lane. Request SDS/TDS/COA in your inquiry.
What speeds up technical selection?
Residue type, substrates, dry time target, residue requirement (pre-paint/pre-bond), and any VOC/flammable restrictions. A current SDS is very helpful.
Do you offer “low odor” options?
Options may be available depending on solvent class and constraints. Share your odor/indoor-use requirements and we’ll propose viable profiles.